- Home
- ยป
- Products & Services
- »
- Effluent Treatment Plant
Effluent Treatment Plant
Rice Mill Effluent Treatment Plant
Capacity Inlet Flow Rate | 1000 m3/hour |
Automation Grade | Semi-Automatic |
Material | Mild Steel |
Voltage Supply | 380 V |
Frequency | 50 Hz |
Phase | 3 Phase |
Reactor Type | MBBR Reactor |
Efficiency | 60 - 80 % |
Brand | RCI |
The MBBR reactor shaves off 60-80% BOD and reduces the load to downstream activated sludge process significantly resulting in a very efficient treatment with a lower footprint.
Features
- Robust - It is stable under load variations, insensitive to temporary limitation and provides consistent treatment results
- Efficient - It generates low solids and requires no or minimum polymer for solid/liquid separation
- Compact - It requires a small footprint. Typically it requires 1/3rd the space required for Activated Sludge Process.
- Cost - It requires a low capital cost and is comparable to cost of Activated Sludge Process. It is cheaper than the MBR process.
- Flexible - Existing plants can be upgraded easily with MBBR. New MBBR plants can be upgraded to handle higher loads with no or minimum cost and construction.
- Trouble Free- It is easy to operate, has automatic sludge wasting, has no sludge Return and no MLSS, and there no issue of media clogging.
Wastewater Treatment Plant For Beverage Industry
Capacity Inlet Flow Rate | 1000 m3/hour |
Water Source | Municipal Sewage |
Industry | Beverage industry |
Automation Grade | Semi-Automatic |
Material | SS + FRP |
Voltage | 220-380 V |
Frequency | 50-60 Hz |
Brand | RCI |
Features:
- Large contact surface area
- Advanced technology is implemented
- Accurate corrugation depth and pitch
Effluent Treatment Plant For Hospital
Capacity (KLD) | 7 KLD - 120 KLD |
Application Industry | Hospital |
Inlet Flow Rate(m3/day) | 100 m3/day |
Treatment Technology | Mixed Bed Bio Reactor(MBBR) |
Treatment Technique | Sedimantation |
Material Of Construction | Mild Steel |
Water Source | Industrial Effluent |
Control Module | Available |
Automation Grade | Automatic |
Deliver Type | PAN India |
Treatment Stages | Preliminary Treatment |
Warranty | 1 Year |
I Deal In | New Only |
Overall Dimensions | 80 Sq. Feet |
Treated Water Quality | As per Norms |
Features | Less Space,Batchwise Process |
Water Pump Power | 0.5 kW |
Installation Type | Prefabricated |
Country of Origin | Made in India |
Voltage | 380 V |
SYSTEM DESCRIPTION:
Primary Treatment:
Effluent is taken to Equalization tank through bar screen floating mass and
solid materials. The Effluent is collected in the equalization tank to avoid
any septic condition. This also helps mix the effluent properly and reduces
any chance of its dilutions. Effluent is pumped in Reaction cum Flocculation
Tank with the help of acid-alkaline handling PP / CI effluent feed pump.
After filling the tank Coagulant & Flocculants dosing is carried out through
the Coagulation & Flocculation Tank. With the help of coagulation &
Flocculation we decrease COD & BOD and also we remove Non-
Biodegradable suspended solids. For mixing of Coagulant & Flocculants we
use mechanical agitator or Aeration system. After this treatment we give
some retention time for primary sludge settling thus sludge will be settled
down & it is passed to SDB and superfast is passed to Intermediate Tank.
Tertiary treatment:
Treated water will be further polished in the Dual media filters. This is
called as Tertiary treatment.
Filtered water will be collected in the Irrigation water tank from where it
will be pumped to the Irrigation system or dispose it.
Sludge dewatering system
Sludge generated in the system will be diverted to Sludge Drying Bed
system by gravity. The excess sludge collected from the bottom of Reaction
cum Flocculation tank and passed on to sludge drying Bed. It can be
periodically scrapped off from there and disposed, as per waste managment system.
Effluent Treatment & Wastewater Treatment Plant
Minimum Order Quantity: 1 Piece
Capacity (KLD/MLD) | 500 KLD |
Application Industry | Dairy industry |
Inlet Flow Rate(m3/day or m3/hr) | 500 m3/hr |
Treatment Technology | Mixed Bed Bio Reactor(MBBR) |
Water Source | Industrial Effluent |
Control Module | Available |
Automation Grade | Semi-Automatic |
Material Of Construction | Mild Steel |
Treatment Stages | Primary Treatment, Preliminary Treatment |
Warranty | 1 Year |
We are having promising technologies to treat waste water generated from various industries containing highly organic, inorganic load, oil and grease, heavy metals and suspended solids. Based on the effluent parameters as per nature and compositions, we design steady state models to overcome environmental issues related to industry.
The effluent treatment plant falls under this category as their common names are effluent treatment system, etp, Effluent wastewater treatment plant, dairy etp, mbr etp plant, effluent treatment plant for textile industry, effluent treatment plant system, Effluent Treatment Plant for Pharmaceutical industry, Rice Mill ETP, Effluent Treatment For Rice Mills
Effluent treatment and wastewater treatment plant are called in this way as their common name wastewater treatment plant, effluent treatment plant, etp plant, industrial effluent treatment plant, sewage treatment plant, pharmaceutical wastewater treatment plant, Wastewater Treatment Plant Effluent, wwtp plant, effluent treatment and wastewater treatment plant, Sewage and effluent treatment plant, wastewater treatment effluent plant, effluent wastewater treatment plant, effluent waste treatment plant, effluent treatment and wastewater treatment, effluent treatment plant and wastewater treatment, industrial effluent wastewater treatment, industrial wastewater effluent treatment, Domestic wastewater treatment plant, commercial wastewater treatment plant
The process involved for the treatment of various effluents are anaerobic (UASBR, Anaerobic filter and Biodigester), Aerobic (Surface and diffused aeration), Hybrid (Anaerobic + Aerobic).
Our strength is to achieve the permissible limits for resultant treated water as per government norms.
Salient Features:
- Manual, semi-automatic and automatic systems
- Batch and continuous mode
- Less footprints
- Application industries are Dairies, Food Processing, Electroplating, Automobile, Chemical Industry
As wastewater enters a plant for treatment it flows through a bar screen. This removes large floating objects such as rags and sticks which could clog pipes or damage equipment. Once the wastewater has been screened it passes into a grit chamber, where cinders, sand and small stones settle to the bottom. Once the screening process is complete and grit has been removed, the wastewater still contains organic and inorganic matter along with other suspended solids. This collection of solids can be removed in a sedimentation tank. Biosolids are usually removed from tanks by pumping If you have the right pH, temperature and flow conditions, activated sludge works well as a treatment process. This process is flexible with varying flow rates and can generally handle shock loads. Activated sludge has been used worldwide for decades and carries a much lower risk of failure than newer technologies. In addition, activated sludge treatment of municipal wastewater is more advanced than any other biological treatment process in the world.
Some of the most common secondary treatment processes are biological processes such as trickling filters, activated sludge and rotating biological contactors. Secondary treatment also removes more of the suspended solids, usually by biological processes in which microbes consume the organic impurities as food and then convert them into carbon dioxide, water and energy. Secondary treatment of sewage works by using aerobic bacteria that feed on dissolved and suspended organic matter in the liquid. The sewage enters the aeration tank where the bacteria begin to multiply and feed on the garbage and waste within. After the sewage leaves the settling tank in the primary stage, it is pumped into an aeration tank.
Wastewater Treatment Plant For Dairy Industry
Minimum Order Quantity: 01 Piece
Installation Type | Containerized Plug & Play |
Capacity (KLD) | 500 KLD |
Inlet Flow Rate(m3/day) | 500 m3/day |
Air Blower Count | 2 Blowers |
Air Blower Power | 0.5 KW |
Treatment Technology | Mixed Bed Bio Reactor(MBBR) |
Material Of Construction | Stainless Steel |
Voltage (V) | 220-380 V |
Control Module | Available |
Automation Grade | Automatic |
Treatment Stages | Secondary Treatment |
Industry | Dairy Industry |
Frequency | 50-60 Hz |
Features:
- Easy installation
- Low Power Consumption
- Automatic regeneration
Commercial Wastewater Treatment Plant
Capacity Inlet Flow Rate | 500 m3/hour |
Water Source | Commercial Waste Water |
Automation Grade | Semi-Automatic |
Material | SS + FRP |
Brand | RCI |
Model Number | WWTP-03 |
Backed by our experienced and highly skilled professionals, we are offering a wide range of Commercial Wastewater Treatment Plant. We manufacture this plant using high grade components and advanced technology. The provided plant removes all the harmful materials present in water. Our experienced professionals construct this plant using the finest quality components with the aid of latest technology. Moreover, prestigious clients can avail this plant from us at industry leading prices.
Features:
- Long service life
- Precisely design
- Efficient cleaning
Dairy Water Effluent Treatment Plant
Automation Grade | Automatic |
Capacity | 6000L/H |
Power Supply | 380V |
Salt Rejection Rate | 98.5% |
Frequency | 50Hz |
Phase | 3 Phase |
The waste water of dairies is loaded with detergents, solids and organic substances such as fat. The RCI process for biological waste water treatment is successfully working in dairies and cheese and dairy producing companies worldwide. RCI Expert offers companies of different sizes the full range of tailor-made processes for pre-treatment and biological treatment of waste water. Depending on company size, product range, amount of waste water and biological load it can be more economical not only to separate fats and solids but also lower COD and BOD loads before discharging into the sewerage. The Dairy Water Effluent Treatment Plant with the highly energy efficient RCI technology also allows for recycling process water, thus reducing water consumption and operating costs. Our solutions are very flexible in times of changing waste water pollutions. The biofilm process combines excellent process stability with minimized sludge volumes.
Features:
- Reduced (Maximum reduced) sludge generation.
- Anaerobic systems are used to reduce power consumption.
- Ultra filtration in final state to reduce FP (fouling potential) of effluent.
- Due to good quality raw material used it results in enhanced recovery.
Commercial Effluent Treatment Plant
Minimum Order Quantity: 1 piece
Installation Type | Prefabricated |
Capacity (KLD/MLD) | 1 MLD |
Inlet Flow Rate(m3/day or m3/hr) | 1000 m3/hr |
Treatment Technology | Mixed Bed Bio Reactor(MBBR) |
Usage/Application | Commercial |
Material Of Construction | Mild Steel |
Water Source | Industrial Effluent |
Control Module | Available |
Automation Grade | Semi-Automatic |
Treatment Stages | Secondary Treatment, Primary Treatment |
Warranty | 1 Year |
Country of Origin | Made in India |
Power Supply | 380 V |
Phase | 3 Phase |
Frequency | 50 Hz |
Effluent treatment and wastewater treatment plant are called in this way as their common name wastewater treatment plant, effluent treatment plant, etp plant, industrial effluent treatment plant, sewage treatment plant, pharmaceutical wastewater treatment plant, Wastewater Treatment Plant Effluent, wwtp plant, effluent treatment and wastewater treatment plant, Sewage and effluent treatment plant, wastewater treatment effluent plant, effluent wastewater treatment plant, effluent waste treatment plant, effluent treatment and wastewater treatment, effluent treatment plant and wastewater treatment, industrial effluent wastewater treatment, industrial wastewater effluent treatment, Domestic wastewater treatment plant, commercial wastewater treatment plant
Features:
- Sturdy construction
- Corrosion resistance
- Longer functional life
As wastewater enters a plant for treatment it flows through a bar screen. This removes large floating objects such as rags and sticks which could clog pipes or damage equipment. Once the wastewater has been screened it passes into a grit chamber, where cinders, sand and small stones settle to the bottom. Once the screening process is complete and grit has been removed, the wastewater still contains organic and inorganic matter along with other suspended solids. This collection of solids can be removed in a sedimentation tank. Biosolids are usually removed from tanks by pumping If you have the right pH, temperature and flow conditions, activated sludge works well as a treatment process. This process is flexible with varying flow rates and can generally handle shock loads. Activated sludge has been used worldwide for decades and carries a much lower risk of failure than newer technologies. In addition, activated sludge treatment of municipal wastewater is more advanced than any other biological treatment process in the world.
Some of the most common secondary treatment processes are biological processes such as trickling filters, activated sludge and rotating biological contactors. Secondary treatment also removes more of the suspended solids, usually by biological processes in which microbes consume the organic impurities as food and then convert them into carbon dioxide, water and energy. Secondary treatment of sewage works by using aerobic bacteria that feed on dissolved and suspended organic matter in the liquid. The sewage enters the aeration tank where the bacteria begin to multiply and feed on the garbage and waste within. After the sewage leaves the settling tank in the primary stage, it is pumped into an aeration tank. During this time, the bacteria break down the organic matter into harmless byproducts. The sludge is now activated with additional billions of bacteria and other tiny organisms and can be used again by returning it to the aeration tank for mixing with air and new sewage.
5000 LPH Effluent Treatment Plant
Minimum Order Quantity: 1 piece
Installation Type | Prefabricated |
Capacity (KLD) | 120 KLD |
Water Source Type | Borewell Water |
Application Industry | paper mill |
Inlet Flow Rate(m3/day) | 100 m3/day |
Treatment Technology | Mixed Bed Bio Reactor(MBBR) |
Material Of Construction | Carbon Steel |
Control Module | Available |
Automation Grade | Automatic |
Voltage | 380 V |
Frequency | 50-60 Hz |
Treatment Stages | Preliminary Treatment, Primary Treatment |
Warranty | 1 Year |
Phase | Three Phase |
Country of Origin | Made in India |
Effluent treatment and wastewater treatment plant are called in this way as their common name wastewater treatment plant, effluent treatment plant, etp plant, industrial effluent treatment plant, sewage treatment plant, pharmaceutical wastewater treatment plant, Wastewater Treatment Plant Effluent, wwtp plant, effluent treatment and wastewater treatment plant, Sewage and effluent treatment plant, wastewater treatment effluent plant, effluent wastewater treatment plant, effluent waste treatment plant, effluent treatment and wastewater treatment, effluent treatment plant and wastewater treatment, industrial effluent wastewater treatment, industrial wastewater effluent treatment, Domestic wastewater treatment plant, commercial wastewater treatment plant
Features:
- Application specific design
- Minimum maintenance
- Excellent working
As wastewater enters a plant for treatment it flows through a bar screen. This removes large floating objects such as rags and sticks which could clog pipes or damage equipment. Once the wastewater has been screened it passes into a grit chamber, where cinders, sand and small stones settle to the bottom. Once the screening process is complete and grit has been removed, the wastewater still contains organic and inorganic matter along with other suspended solids. This collection of solids can be removed in a sedimentation tank. Biosolids are usually removed from tanks by pumping If you have the right pH, temperature and flow conditions, activated sludge works well as a treatment process. This process is flexible with varying flow rates and can generally handle shock loads. Activated sludge has been used worldwide for decades and carries a much lower risk of failure than newer technologies. In addition, activated sludge treatment of municipal wastewater is more advanced than any other biological treatment process in the world.
Some of the most common secondary treatment processes are biological processes such as trickling filters, activated sludge and rotating biological contactors. Secondary treatment also removes more of the suspended solids, usually by biological processes in which microbes consume the organic impurities as food and then convert them into carbon dioxide, water and energy. Secondary treatment of sewage works by using aerobic bacteria that feed on dissolved and suspended organic matter in the liquid. The sewage enters the aeration tank where the bacteria begin to multiply and feed on the garbage and waste within. After the sewage leaves the settling tank in the primary stage, it is pumped into an aeration tank. During this time, the bacteria break down the organic matter into harmless byproducts. The sludge is now activated with additional billions of bacteria and other tiny organisms and can be used again by returning it to the aeration tank for mixing with air and new sewage.
Industrial Effluent Treatment Plant
Minimum Order Quantity: 1 Piece
Installation Type | Containerized Plug & Play |
Capacity (KLD) | 150 KLD |
Application Industry | Food Industry |
Inlet Flow Rate(m3/day or m3/hr) | 150 m3/day |
Treatment Technology | Mixed Bed Bio Reactor(MBBR) |
Material Of Construction | Stainless Steel |
Water Source | Industrial Effluent |
Control Module | Available |
Automation Grade | Semi-Automatic |
Treatment Stages | Secondary Treatment, Primary Treatment |
Warranty | 1 Year |
Plant Type | Effluent Treatment Plant |
Country of Origin | Made in India |
Filtration Precision | 0.01 micron |
Voltage Supply | 380 V |
Frequency | 50 Hz |
The effluent treatment plant falls under this category as their common names are effluent treatment system, etp, Effluent wastewater treatment plant, dairy etp, mbr etp plant, effluent treatment plant for textile industry, effluent treatment plant system, Effluent Treatment Plant for Pharmaceutical industry, Rice Mill ETP, Effluent Treatment For Rice Mills
Effluent treatment and wastewater treatment plant are called in this way as their common name wastewater treatment plant, effluent treatment plant, etp plant, industrial effluent treatment plant, sewage treatment plant, pharmaceutical wastewater treatment plant, Wastewater Treatment Plant Effluent, wwtp plant, effluent treatment and wastewater treatment plant, Sewage and effluent treatment plant, wastewater treatment effluent plant, effluent wastewater treatment plant, effluent waste treatment plant, effluent treatment and wastewater treatment, effluent treatment plant and wastewater treatment, industrial effluent wastewater treatment, industrial wastewater effluent treatment, Domestic wastewater treatment plant, commercial wastewater treatment plant
Features:
- Maximum storage capacity
- High strength
- Easy to install
As wastewater enters a plant for treatment it flows through a bar screen. This removes large floating objects such as rags and sticks which could clog pipes or damage equipment. Once the wastewater has been screened it passes into a grit chamber, where cinders, sand and small stones settle to the bottom. Once the screening process is complete and grit has been removed, the wastewater still contains organic and inorganic matter along with other suspended solids. This collection of solids can be removed in a sedimentation tank. Biosolids are usually removed from tanks by pumping If you have the right pH, temperature and flow conditions, activated sludge works well as a treatment process. This process is flexible with varying flow rates and can generally handle shock loads. Activated sludge has been used worldwide for decades and carries a much lower risk of failure than newer technologies. In addition, activated sludge treatment of municipal wastewater is more advanced than any other biological treatment process in the world.
Some of the most common secondary treatment processes are biological processes such as trickling filters, activated sludge and rotating biological contactors. Secondary treatment also removes more of the suspended solids, usually by biological processes in which microbes consume the organic impurities as food and then convert them into carbon dioxide, water and energy. Secondary treatment of sewage works by using aerobic bacteria that feed on dissolved and suspended organic matter in the liquid. The sewage enters the aeration tank where the bacteria begin to multiply and feed on the garbage and waste within. After the sewage leaves the settling tank in the primary stage, it is pumped into an aeration tank. During this time, the bacteria break down the organic matter into harmless byproducts. The sludge is now activated with additional billions of bacteria and other tiny organisms and can be used again by returning it to the aeration tank for mixing with air and new sewage.
Effluent Treatment Plant For Textile Industry
Capacity (KLD/MLD) | 2 MLD |
Application Industry | Textile Industries |
Inlet Flow Rate(m3/day or m3/hr) | 2000 m3/hr |
Treatment Technology | Mixed Bed Bio Reactor(MBBR) |
Control Module | Available |
Automation Grade | Automatic |
Material Of Construction | Carbon Steel |
Treatment Stages | Primary Treatment |
Warranty | 1 Year |
Water Source | Commercial Waste Water, Industrial Effluent |
Filtration Precision | 0.01 micron |
Finishing | Powder Coated |
Owing to a modernized infrastructure for trouble-free processing & post-production, we are instrumental in manufacturing premium grade Effluent Treatment Plant For Textile Industry. The offered plant is manufactured with great precision by making use of optimum grade components and high-tech machines in synchronization with set industry norms. This plant is used for treatment of wastewater in different industries such as pharmaceutical, factories, food, beverages, etc.
The effluent treatment plant falls under this category as their common names are effluent treatment system, etp, Effluent wastewater treatment plant, dairy etp, mbr etp plant, effluent treatment plant for textile industry, effluent treatment plant system, Effluent Treatment Plant for Pharmaceutical industry, Rice Mill ETP, Effluent Treatment For Rice Mills
Effluent treatment and wastewater treatment plant are called in this way as their common name wastewater treatment plant, effluent treatment plant, etp plant, industrial effluent treatment plant, sewage treatment plant, pharmaceutical wastewater treatment plant, Wastewater Treatment Plant Effluent, wwtp plant, effluent treatment and wastewater treatment plant, Sewage and effluent treatment plant, wastewater treatment effluent plant, effluent wastewater treatment plant, effluent waste treatment plant, effluent treatment and wastewater treatment, effluent treatment plant and wastewater treatment, industrial effluent wastewater treatment, industrial wastewater effluent treatment, Domestic wastewater treatment plant, commercial wastewater treatment plant
Features:
- Easy to install
- High performance
- Long service life
- material are Carbon Steel + Stainless Steel + FRP
- Capacity (KLD/MLD) are also we deal in 100KLD-2MLD
As wastewater enters a plant for treatment it flows through a bar screen. This removes large floating objects such as rags and sticks which could clog pipes or damage equipment. Once the wastewater has been screened it passes into a grit chamber, where cinders, sand and small stones settle to the bottom. Once the screening process is complete and grit has been removed, the wastewater still contains organic and inorganic matter along with other suspended solids. This collection of solids can be removed in a sedimentation tank. Biosolids are usually removed from tanks by pumping If you have the right pH, temperature and flow conditions, activated sludge works well as a treatment process. This process is flexible with varying flow rates and can generally handle shock loads. Activated sludge has been used worldwide for decades and carries a much lower risk of failure than newer technologies. In addition, activated sludge treatment of municipal wastewater is more advanced than any other biological treatment process in the world.
Some of the most common secondary treatment processes are biological processes such as trickling filters, activated sludge and rotating biological contactors. Secondary treatment also removes more of the suspended solids, usually by biological processes in which microbes consume the organic impurities as food and then convert them into carbon dioxide, water and energy. Secondary treatment of sewage works by using aerobic bacteria that feed on dissolved and suspended organic matter in the liquid. The sewage enters the aeration tank where the bacteria begin to multiply and feed on the garbage and waste within. After the sewage leaves the settling tank in the primary stage, it is pumped into an aeration tank. During this time, the bacteria break down the organic matter into harmless byproducts. The sludge is now activated with additional billions of bacteria and other tiny organisms and can be used again by returning it to the aeration tank for mixing with air and new sewage.
Wastewater Treatment Plant For Petroleum Industry
Minimum Order Quantity: 01 piece
Installation Type | Containerized Plug & Play |
Capacity (KLD) | 500 KLD - 1000 KLD |
Inlet Flow Rate(m3/day) | 1000 m3/day |
Air Blower Count | 3 Blowers |
Air Blower Power | 0.75 KW |
Treatment Technology | Mixed Bed Bio Reactor(MBBR) |
Control Module | Available |
Automation Grade | Semi-Automatic |
Treatment Stages | Primary Treatment, Secondary Treatment |
Industry | Petroleum Industry |
Voltage | 220-380 V |
Features:
- Correct heating elements
- Long lasting
- Quick and complete cleaning
Wastewater Plant For Paper Industry
Installation Type | Prefabricated |
Capacity (KLD/MLD) | 10 KLD - 1 MLD |
Application Industry | paper Mill |
Inlet Flow Rate(m3/day or m3/hr) | 1000 m3/day |
Treatment Technology | Mixed Bed Bio Reactor(MBBR) |
Material Of Construction | Carbon Steel |
Water Source | Industrial Effluent |
Control Module | Available |
Automation Grade | Automatic |
Treatment Stages | Secondary Treatment, Primary Treatment |
Warranty | 1 Year |
Plant Type | Wastewater Treatment Plant |
Country of Origin | Made in India |
Min Treatment Capacity | 0.5 m3/h |
Max Treatment Capacity | 40 m3/H |
Salt Rejection Rate | 98.0% |
We have gained huge popularity among the clients, as we are engaged in manufacturing an exclusive range of Wastewater Plant For Paper Industry. This plant is constructed by utilizing premium quality components under the strict supervision of our adroit professionals. Our offered plant is used in various industries for the treatment of waste water. Moreover, our quality controllers check this plant on different parameters to ensure its flawless functionality.
Effluent treatment and wastewater treatment plant are called in this way as their common name wastewater treatment plant, effluent treatment plant, etp plant, industrial effluent treatment plant, sewage treatment plant, pharmaceutical wastewater treatment plant, Wastewater Treatment Plant Effluent, wwtp plant, effluent treatment and wastewater treatment plant, Sewage and effluent treatment plant, wastewater treatment effluent plant, effluent wastewater treatment plant, effluent waste treatment plant, effluent treatment and wastewater treatment, effluent treatment plant and wastewater treatment, industrial effluent wastewater treatment, industrial wastewater effluent treatment, Domestic wastewater treatment plant, commercial wastewater treatment plant
Features:
- Corrosion resistant
- Easy to operate
- High performance
- material are Carbon Steel,GFRP
As wastewater enters a plant for treatment it flows through a bar screen. This removes large floating objects such as rags and sticks which could clog pipes or damage equipment. Once the wastewater has been screened it passes into a grit chamber, where cinders, sand and small stones settle to the bottom. Once the screening process is complete and grit has been removed, the wastewater still contains organic and inorganic matter along with other suspended solids. This collection of solids can be removed in a sedimentation tank. Biosolids are usually removed from tanks by pumping If you have the right pH, temperature and flow conditions, activated sludge works well as a treatment process. This process is flexible with varying flow rates and can generally handle shock loads. Activated sludge has been used worldwide for decades and carries a much lower risk of failure than newer technologies. In addition, activated sludge treatment of municipal wastewater is more advanced than any other biological treatment process in the world.
Some of the most common secondary treatment processes are biological processes such as trickling filters, activated sludge and rotating biological contactors. Secondary treatment also removes more of the suspended solids, usually by biological processes in which microbes consume the organic impurities as food and then convert them into carbon dioxide, water and energy. Secondary treatment of sewage works by using aerobic bacteria that feed on dissolved and suspended organic matter in the liquid. The sewage enters the aeration tank where the bacteria begin to multiply and feed on the garbage and waste within. After the sewage leaves the settling tank in the primary stage, it is pumped into an aeration tank. During this time, the bacteria break down the organic matter into harmless byproducts. The sludge is now activated with additional billions of bacteria and other tiny organisms and can be used again by returning it to the aeration tank for mixing with air and new sewage.
100000 LPD Industrial Wastewater Treatment Plant
Water Source | Industrial Effluent, Municipal Sewage, Commercial Waste Water |
Capacity | 100000 LPD |
Voltage (V) | AC 380 V |
Industry | ALL TYPE |
Material | SS + FRP |
Automatic Grade | Semi-Automatic |
Brand | RCI |
Model Number | WWTP-01 |
Features:
- High speed filtration
- Long service life
- Fast purification
Semi-Automatic Packaged Effluent Treatment Plant
Minimum Order Quantity: 1 Piece
Capacity (KLD) | 100 KLD |
Inlet Flow Rate(m3/day) | 100 m3/day |
Application Industry | Pharmaceutical & Chemicals |
Treatment Technology | Mixed Bed Bio Reactor(MBBR) |
Water Source | Industrial Effluent, Commercial Waste Water |
Control Module | Available |
Automation Grade | Semi-Automatic |
Treatment Stages | Preliminary Treatment, Secondary Treatment, Primary Treatment |
Warranty | 1 Year |
Plant Type | Effluent Treatment Plant |
Material | Carbon Steel + Stainless Steel + FRP |
Country of Origin | Made in India |
Effluent Treatment Plant (ETP) is a waste water treatment process (WWTP) that is used to treat wastewater. It's mostly used in industries like pharmaceuticals, textiles, and chemicals where extreme water contamination is a possibility. The Effluent Treatment Plant plays a significant role in the treatment of industrial waste water as well as domestic sewage.
Effluent Treatment Plant(ETP Plant) is used for wastewater treatment process for Dairy Industry, Textile Industry and Food/Beverage Processing industries. Their common names are Effluent Treatment System, Effluent Treatment Plant, ETP, ETP Plant, Effluent Wastewater Treatment Plant, MBR Plant, Effluent Treatment Plant for Pharmaceutical industry, and many more.
Semi-Automatic Packaged Effluent Treatment Plant, we offer are designed for handling the liquid waste produced by a manufacturing or servicing unit. our entire range of packaged effluent treatment system is executed in such a way that suits various needs of different industrial applications such as in paint shop, dairy and food products, paper mills, oil refineries, leather industry, glass factories, chemical and processing industries etc. The packaged effluent treatment plants involve different stages of treatment including chemical treatment and biological treatment followed by tertiary treatment. We offer technologically advanced ETP's that are designed to provide long term trouble free operation with easy maintenance.
Features:
- Compact and sturdy design
- Odorless
- Low power consumption